Latest updates

Non Woven Abrasives: Complete Guide to Products, Types and Applications

Non woven abrasives are widely used in metal finishing, stainless steel fabrication, surface preparation and polishing. They help remove light scratches, clean surfaces, blend weld marks and achieve a consistent finish without removing excessive material.

Unlike conventional coated abrasives, non woven abrasives are made from a three dimensional network of synthetic fibres bonded together with abrasive grains and resin. This open structure allows air to circulate through the material, helping reduce heat buildup and providing a more controlled finishing process.

At Flap Craft, we offer a range of non woven abrasive products designed for different finishing requirements, from weld blending and surface cleaning to fine polishing and finishing operations.

What Are Non Woven Abrasives?

Non woven abrasives are flexible abrasive materials manufactured using synthetic fibres, abrasive grains and bonding agents. The fibres form an open, interconnected structure that holds the abrasive grains throughout the material.

This construction allows the abrasive to work evenly across the surface while providing flexibility and…

Rolloc Disc: Types, Uses and Applications of Abrasive Quick-Change Discs

Choosing the right abrasive is essential for achieving the desired surface finish, improving productivity and maintaining consistent results in metal fabrication. Rolloc Discs are quick-change abrasive discs designed for grinding, deburring, weld blending and surface finishing across a wide range of industrial applications.

Flap Craft offers abrasive solutions for different metalworking requirements, including Aluminium Oxide Rolloc Discs, Ceramic Rolloc Discs, Zirconia Rolloc Discs and Non-Woven Rolloc Discs. Each type is designed for different finishing needs, from general-purpose material removal to demanding grinding and surface conditioning applications.

What Is a Rolloc Disc?

A Rolloc Disc, also known as a Roloc disc or quick-change abrasive disc, is a compact abrasive disc that attaches to a compatible holder or backing pad. Its quick-change mounting system allows operators to replace discs quickly when switching between abrasive grades or finishing operations.

These discs are widely used in stainless steel fabrication, automotive component manufacturing, metalworking workshops and industrial surface…

Abrasive Velcro Disc: Complete Guide to Mesh Discs for Metal Finishing

Achieving a clean, uniform metal finish is not just about the machine or the operator, the abrasive disc you choose plays a major role in the final result. From removing surface imperfections and preparing welds to blending, deburring and creating a consistent finish, the right abrasive can significantly improve both productivity and surface quality.

This is where Abrasive Velcro Discs come into the picture. Designed with a convenient hook-and-loop backing, these discs can be changed quickly and are widely used for sanding and surface preparation. Among the latest abrasive solutions, Mesh Discs offer an open abrasive structure designed to improve sanding performance and dust management when used with suitable extraction systems.

At Flap Craft, we manufacture advanced abrasive solutions for metalworking and surface finishing applications. Our Mesh Disc range is available in Ceramic and Aluminium Oxide abrasives, giving fabricators, manufacturers and finishing professionals the flexibility to choose the right abrasive for their application.

Whether you're working with stainless steel, mild steel or other metal…

Abrasive Products for SS Pipe & Tube Finishing

Stainless steel pipes and tubes are used in railings, kitchen equipment, furniture, automotive parts and many other fabrication applications. Getting a clean and consistent finish depends a lot on using the right abrasive at the right stage.

From weld removal and grinding to blending and final finishing, different jobs need different abrasive products.

Flap Wheel for Grinding & Blending

A flap wheel is useful when you need to grind, blend welds or smooth the surface of stainless steel pipes and tubes.

Its flexible flaps work well on curved surfaces, making it a practical choice for tube and pipe finishing.

It can be used for:

• Weld blending
• Removing surface marks
• Smoothing edges
• General grinding
• Preparing the surface for further finishing

Ceramic Belt for Faster Grinding

When you need faster material removal, especially during heavy grinding or weld removal, a ceramic abrasive belt can be a better choice.

Ceramic belts are designed for demanding applications where cutting performance and productivity are important.

They are particularly useful when working with stainless steel fabrication where you need to remove material quickly before…

Best Abrasives for Stainless Steel Fabrication: A Practical Guide

Stainless steel is widely used in kitchen equipment, railings, furniture, automotive components, architectural structures, and industrial fabrication. But getting a clean and consistent finish depends heavily on choosing the right abrasive.

The wrong abrasive can cause deep scratches, excessive heat, uneven finishing, or unnecessary material removal. So, what are the best abrasives for stainless steel fabrication?

The answer depends on the application.

Choosing the Right Abrasive for Stainless Steel

Different stages of stainless-steel fabrication require different abrasive solutions. An abrasive that works well for heavy weld removal may not be the right choice for final finishing.

Ceramic Abrasives for Heavy Material Removal

Ceramic abrasives are designed for demanding grinding applications where fast cutting and high productivity are important.

They are particularly useful for heavy weld removal, edge grinding, and applications where a large amount of material needs to be removed quickly.

Ceramic flap discs and ceramic belts can be a suitable choice when high cutting performance and abrasive life are priorities.

Zirconia…

Ceramic Abrasives in India: Ceramic Belts, Flap Discs and Rolloc Discs

Choosing the right abrasive can make a major difference in grinding speed, material removal and overall finishing performance. For demanding metalworking applications, ceramic abrasives are becoming an increasingly preferred option.

To meet this demand, Flap Craft has introduced its new Ceramic Abrasive Range, manufactured in India for industrial grinding and finishing applications.

The range includes Ceramic Abrasive Belts, Ceramic Flap Discs and Ceramic Rolloc Discs, designed for applications where high cutting performance and longer abrasive life are important.

What Are Ceramic Abrasives?

Ceramic abrasives use engineered ceramic abrasive grains designed for aggressive cutting and efficient material removal.

During grinding, the ceramic grain continuously exposes fresh cutting edges, helping maintain cutting performance during demanding applications.

This makes ceramic abrasives particularly suitable for stainless steel, carbon steel, alloy steel, weld grinding, deburring and heavy material removal.

For industries where grinding is a regular production activity, the right ceramic abrasive can help improve…

Buy Flap Wheels Direct from the Manufacturer

For businesses that use flap wheels regularly, choosing the right supplier is just as important as choosing the right product. Buying directly from the manufacturer can make the entire purchasing process simpler and more efficient.

Why Buy Direct?

When you deal directly with a manufacturer, you can discuss your requirements without unnecessary intermediaries.

1. Direct Communication

Discuss your exact requirements directly with the manufacturer — including size, grit, quantity and application.

2. Bulk Orders

If you require flap wheels in large quantities, direct sourcing makes it easier to discuss bulk requirements and regular orders.

3. Custom Requirements

Need a specific size or specification? A direct conversation with the manufacturer makes it easier to check what can be supplied.

4. Consistent Supply

For production units and workshops, regular availability is important. Working with one manufacturer can make repeat ordering and stock planning easier.

5. Direct Quotations

Instead of comparing prices through multiple suppliers, you can request a quotation based on your actual requirements and quantity.

6. Easier Repeat Orders

Once your regular…

AeroLine Straight Die Grinder - For Grinding, Finishing & Surface Preparation

When it comes to metal grinding and finishing, the right combination of power tool and abrasive can make the work faster and give a better finish.

The AeroLine Straight Die Grinder is designed for grinding, deburring, polishing and surface preparation in workshops, fabrication units and metalworking applications. And when paired with the right Abrasive Mop Wheel, you get a practical setup for a wide range of finishing jobs.

Powerful Grinding Performance

The AeroLine Straight Die Grinder comes with an 800W Marathon Motor and a double reduction gear system, making it suitable for demanding workshop applications.

Its straight design also makes it easier to work on edges, corners and areas that can be difficult to reach with larger grinding machines.

Variable Speed for Better Control

Different finishing jobs need different speeds. The AeroLine Straight Die Grinder offers a 1900–8000 RPM speed range with VTC full-wave electronic speed control.

This allows you to adjust the speed according to the material, abrasive and type of work, giving you better control during grinding and finishing.

Use: It can be used with…